WMF bistro! Service manual
1.2
Checklist for setup
Update software to current status
(only possible with laptop program "KonfigTool")
Set descaling filter (if existent) and filter range
(Service program
Machine configuration
Set expert mode for customer (machine data
control
expert or "KonfigTool"
machine configuration
Perform Brewer calibration (service program
routines)
Calibrate portioners (service program
routines)
Recommendation:
Adjust milk temperature using nozzle and pinch valve
Adjust foam quality and temperature using nozzle and
under
Setting
Set recipes or transfer the given standards to the
machine
Set button functions and beverages according to
customer specifications
(Settings or "KonfigTool"
Set cup volumes (Setting)
Tip: If the filling amount setting is too small for large
vessels, use the "pot" recipe
Set sequence of additions according to customer
specifications (recipes and buttons/additions)
Enter service point
(only possible with "KonfigTool").
Save data in service memory (Service Program
Machine data
Backup machine data on laptop
6
machine data or "KonfigTool"
counter page)
PIN page)
foam quality
beverage data)
Standards
Customer
Access
service
service
Service)
Service manual WMF bistro! Edition 08/2011
Expert can confirm customer
check-up and filter exchange and
set the filter range in the Settings
menu.
Fine settings beverages under
changing recipes:
Amount of coffee powder
Amount of water
Amount of foam
Amount of milk
Foam quality
Brewing temperature
Additional settings after the
service PIN is entered