Setting | Signal (Video) - Optoma WU630 User Manual

USER CONTROLS

SETTING | Signal (Video)

Note: "Signal" is only supported when the source is Video.
White Level
Allow user adjust White Level when inputting Video signals.
Black Level
Allow user adjust Black Level when inputting Video signals.
Saturation
Adjust a video image from black and white to fully saturated color.
• Press the ◄ to decrease the amount of saturation in the image.
• Press the ► to increase the amount of saturation in the image.
IRE
Adjust setup(black) level of composite video signals.
Note:
"IRE" is only supported on NTSC signal.
English 33