Optoma WU630 User Manual page 37

USER CONTROLS
Crestron RoomView Control Tool
Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network
(more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView
monitors each projector, including projector's online status, system power, lamp life, network setting and hardware
faults, plus any custom attribute as defined by the Administrator.
The Administrator can add, delete, or edit room information, contact information and events, which are logged auto-
matically by the software for all users. (Operation UI as following image)
Note: Crestron RoomView function support is dependent on models.
1. Main Screen
2. Edit Room
On the "Edit Room" page, enter the IP Address (or hostname) as shown on the projector's on-screen display
(OSD) menu, and "02" for IPID, "41794" for the reserved Crestron control port.
About Crestron RoomView™ setting and command method, please access below website to get RoomView™
User Guide and more information:
http://www.crestron.com
English 37