Sewing Light; To Remove And Attach The Presser Foot - Janome US-2004 Instruction Book

(B)
(A)

Sewing Light

The sewing light is located behind the face plate.
To change the bulb, take the face plate off the sewing
machine by removing the set screw.
* Unolug the power supply before changing the bulb.
(A) To remove ........... Turn to the left.
To replace ........... Turn to the right.
(B) To remove ........... Push and twist to the left.
To replace ........... Push and twist to the right.

To Remove and Attach the Presser Foot

To remove
Turn the handwheel toward you to raise the needle to
its highest position.
Raise the presser foot.
Press the lever on the back of the foot holder.
The presser foot will drop off.
To attach
Place the presser foot so the pin on the foot lies just
under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
6