Section V Care Of Your Machine; Dismantling And Assembling Hook Race - Janome US-2004 Instruction Book

5
4
7

SECTION V CARE OF YOUR MACHINE

Dismantling and Assembling Hook Race

Note:
To dismantle hook race:
2
Raise the needle to its highest position and open the hook
cover.
Open the hinged latch of bobbin case and take it out of
the machine.
1
Open the hook race ring holders and remove the hook
race ring.
Remove the hook.
* Clean the hook race with a brush and a soft dry
cloth.
To assemble hook race:
Hold the hook by the center pin and fit it carefully back
3
into the hook race, forming a perfect circle with the shuttle
driver.
Attach the hook race ring making sure the bottom pin
fits into the notch.
Lock the hook race ring by turning the holders back into
position. Insert the bobbin case.
6
26
Turn off the power switch or unplug the
machine.
1
Bobbin case
2
Hook race ring holder
3
Hook race ring
4
Hook
5
Hook race
1
Pin
2
Notch