Table of Contents
Advertisement
BH
2
4
1
3
2
1
1
Corded Buttonhole
1
2
3
3
1. When the buttonhole foot is raised, hook the cord
2. Bring the ends toward you under the buttonhole
3. Hook the filler cord into the forks on the front of
4. Lower the needle into the garment where the
5. Depress the foot control gently and sew the
6. Remove the fabric from the machine and cut the
7. Pull the left end of the filler cord to tighten it.
8. Thread the end through a darning needle, draw to
22
Stitch selector:
BH
Presser foot:
Sliding buttonhole foot
Thread tension:
1 - 5
on the cord spur at the back of the buttonhole foot.
1
Spur
foot until they clear the front end.
foot to hole them tight.
buttonhole will start and lower the foot.
buttonhole.
Each side of the buttonhole and the bartacks will be
sewn over the cord.
sewing threads.
the other side of the fabric and cut.
Advertisement
Table of Contents
