Table of Contents
Advertisement
BH
4
1
3
2
1
[1] [2]
(B)
(C)
[3]
[4]
[7]
2
3
(A)
[6]
[5]
Buttonhole
1
Stitch selector:
2
Presser foot:
3
Thread tension:
[1]
Carefully mark buttonhole length on fabric.
Place the fabric under the foot with the buttonhole
marking running toward you.
[2]
Move the slider (A) toward you so that the top mark
(C) on the slider meets the start mark (B). Line up
the markings on the foot with the top mark on the
fabric. Lower the presser foot.
NOTE: The marking on the slider are engraved in
centimeters.
[3]
Set the stitch selector at
reach the front marking of your buttonhole. Stop
sewing at a left stitch.
[4]
Set the stitch selector at
(6) stitches. Stop sewing at a right stitch.
[5]
Set the stitch selector at
the back marking of the buttonhole. Stop sewing at
a right stitch.
[6]
Set the stitch selector at
(6) stitches. Stop sewing at a left stitch.
[7]
Remove the fabric and open a hole with a seam
ripper/buttonhole opener.
21
BH
Sliding buttonhole foot
1 - 5
. Sew forward until you
1
4
. Sew four (4) to six
2
. Sew until you reach
3
4
. Sew four (4) to six
2
Advertisement
Table of Contents
