Samsung NE58H9970WS User Manual page 76

To lubricate the slides with graphite lubricant
1. Remove the rack from the oven. See removing
the gliding rack in the USING THE GLIDING RACK
section.
2. Fully extend the rack on a table or countertop.
Newspaper may be placed underneath the rack for
easy cleanup.
3. If there is debris in the slide tracks, wipe it away
using a paper towel. (Any graphite lubricant wiped
away must be replaced - See steps 4 through 7.
4. Shake the graphite lubricant before opening
it. Starting with the left (front and back) slide
mechanism of the rack, place four (4) small drops
of lubricant on the two (2) bottom tracks of the slide
close to the bearing carriers.
5. Repeat for the right (front and back) slide
mechanism of the rack.
6. Open and close the rack several times to distribute
the lubricant.
7. Replace the cap on the lubricant and shake it again.
Turn the rack over and repeat steps 3, 4, 5 and 6.
8. Close the rack, turn rack right-side-up and place in
the oven. See installing the gliding rack in the USING
THE GLIDING RACK section.
• Do not spray the gliding rack with cooking
spray or other lubricant sprays.
English - 76
3
4
4
5
5