Lubrication Chart - Matchless 1964 G3 350 Instruction Book

BRAKE DRUM BEARING (CS A N D CSR MODELS)
The independent ball bearing upon which the rear brake drum is mounted, is packed
with grease upon assembly and requires no further attention for a considerable time.
During a general overhaul however it is recommended that the bearing is dismantled and
re-packed with fresh hub grease.

LUBRICATION CHART

The figures in diamond frames refer to parts located on the left hand side of the machine
and those in circles refer to parts located on the right hand side, and apply to both
single and twin cylinder models.
Engine Oil Locations
16 MAIN OIL TANK.
7 FRONT CHAINCASE.
8
CONTROL LEVER MOVING PARTS.
20
BRAKE ROD JOINTS.
2
6
CENTRE AND PROP STAND HINGE PINS.
19
Hydraulic Fluid Locations
12
FRONT TELEDRAULIC FORKS.
24
Heavy Engine Oil Location
GEAR BOX.
18
When buying oils and greases it is advisable to specify the Brand as well as the grade
and, as an additional precaution, to only buy in sealed containers or from branded cabinets.
BRAKE EXPANDER LUBRICATION
Grease nipple on each brake expander bush.
grease sparingly. Excessive grease may impair efficiency of brakes.
Illustration 10
Lubrication Chart
FRONT HUB.
23
14 REAR HUB.
21 STEERING HEAD TOP BEARING.
9 STEERING HEAD BOTTOM BEARING.
15 SPEEDOMETER GEAR BOX.
10 FRONT BRAKE EXPANDER.
REAR BRAKE EXPANDER.
3
BRAKE PEDAL SPINDLE.
5
Heavy Gear Oil Location SAE-140
17 REAR FORK HINGE.
4 REAR CHAIN.
(One on each brake cover plate.
22
22
Grease Locations
Molten Grease Location
Use