Table of Contents
Advertisement
Infoprint 1222
5. Remove the solenoid [B].
6. With the printer on its back, remove the D–roll. See
Tray 1 Feed Removal" on page 4-33
7. Slowly extract the shaft while facing the D–roll end.
Note: Capture the small washer and the bearing. (The bearing
must be removed and reinserted through the opening adjacent
to its operating location [A]. See page
information.
"D–Roll
for more information.
page 4-33
for more
Repair Information
4-35
Advertisement
Table of Contents
