Table of Contents
Advertisement
Infoprint 1222
Right Side Cover Removal
1. Remove the paper tray.
2. Remove the front right screw and same side rear screw from
the top cover. See
page 4-6
Note: If you do not have an appropriate screwdriver to access the
front right screw, remove the two screws holding the right
side of the front cover to the hinge. Move the front cover just
enough to access the screw.
3. Open the MPF.
4. Lift the top cover just enough to grasp the top of the right side
cover with your right hand [B].
5. While pulling out on the top of the right side cover, use your left
hand to release the two latches (top front and lower front) [A].
4-10
Service Manual
"Top Cover Assembly Removal" on
for more information.
Advertisement
Table of Contents
