Figure 37. Removing and installing a 1.8 inch (x16) SAS SSD backplane
1.
power cable
3.
retention screw on the top of the
backplane (3)
5.
backplane cable connector that connects
to the connector on the expander card
7.
guide pin (3)
9.
SSD cage
Next steps
1.
Install the SSD backplane.
Related Links
Installing a 1.8 inch (x16) SAS SSD backplane
Removing the sled
2.
alignment pin
4.
backplane cable (2)
6.
backplane
8.
backplane cable connector that
connects to the connector on the
system board
99