Advertisement
Quick Links
84VP5/84VM5 Installation Guide
(also a reference for optional Quad Mount used with 42VM5 or 42VP5)
Contents
Product Description
Type:
84VP5/84VM5 System Resolution: 1706x960
42VP5/42VM5 Display Resolution: 853x480
Aspect Ratio:
Color Correction:
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display system and the installation must be in accordance with any
local building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched
horizontally to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
The recommended PC resolution is 1365 x 768, next recommended resolution is 848 x 480
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
853 x 480
853 x 480
www.necvisualsystems.com
Plasma Display System (2x2 Matrix
using either 42VM5 or 42VP5)
16:9
NEC CCF (Capsulated Color Filter)
Total Resolution: 1706 x 960
(using four 42VM5 or 42VP5 Plasma Displays)
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Screen Surface:
84VP5/84VM5 System Dimensions: 80.2"(W) x 48.0"(H) x 8.0"(D)
42VP5/42VM5 Display Dimensions: 40"(W) x 24"(H) x 3.5"(D)
84VP5/84VM5 System Weight:
42VP5/42VM5 Display Weight:
853 x 480
853 x 480
NEC Solutions (America), Inc.
Visual Systems
42VM5: Anti-Reflective
42VP5: Anti-Glare
319.2 lbs
61.8 lbs (Quad Mount Wt: 72 lbs)
Page 1 of 14
v1.3
Advertisement
Related Manuals for NEC PlasmaSync 84VM5
Summary of Contents for NEC PlasmaSync 84VM5
-
Page 1: Table Of Contents
Aspect Ratio: 16:9 Color Correction: NEC CCF (Capsulated Color Filter) Notes This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by step procedure for installation. -
Page 2: System Dimensions
(also a reference for optional Quad Mount used with 42VM5 or 42VP5) System Dimensions Dimensions are in inches. For millimeters multiply by 25.4. www.necvisualsystems.com NEC Solutions (America), Inc. (using four 42VM5 or 42VP5 Plasma Displays) Visual Systems v1.3 Page 2 of 14... -
Page 3: System Ventilation Requirements
(also a reference for optional Quad Mount used with 42VM5 or 42VP5) System Ventilation Requirements Dimensions below show minimum requirements for ventilation. Ventilation Requirement is 2" around the units www.necvisualsystems.com NEC Solutions (America), Inc. (using four 42VM5 or 42VP5 Plasma Displays) Wall Wall Minimum Wall Recess Opening 84.2" x 52.0"... -
Page 4: Quad Mount Isometric Drawing
84VP5/84VM5 Installation Guide (also a reference for optional Quad Mount used with 42VM5 or 42VP5) Quad Mount Isometric Drawing www.necvisualsystems.com NEC Solutions (America), Inc. (using four 42VM5 or 42VP5 Plasma Displays) Visual Systems v1.3 Page 4 of 14... -
Page 5: Mounting Points For Quad Mount
(also a reference for optional Quad Mount used with 42VM5 or 42VP5) Mounting Points for Quad Mount Dimensions are in inches. For millimeters multiply by 25.4. www.necvisualsystems.com NEC Solutions (America), Inc. (using four 42VM5 or 42VP5 Plasma Displays) Visual Systems v1.3... -
Page 6: Control
(also a reference for optional Quad Mount used with 42VM5 or 42VP5) Control Connections Connections should be made as described below. plasma monitor 1) Connector on the plasma monitor side: EXTERNAL CONTROL connector. Type of connector: D-Sub 9-pin male Pin Name No Connection RXD (Receive data) - Page 7 Unit ID 1 and unit ID 2 are numbers used to identify the equipment that is to be connected. 60H is used for the plasma monitor and 80H is used for external control equipment such as a personal computer. Unit ID 1: Indicates the equipment sending the signal. When supporting Set ID by the command 1, 4 bits of low ranks of Set ID are set up.
- Page 8 When controlling two or more sets of plasma monitors, if the command using Set ID is used, it will become controllable individually. The example of the POWER ON command to the plasma monitor which set ID as "5" is shown below. It is not based on ID but is the POWER ON command to all sets.
- Page 9 The external control equipment switches on the power of the plasma monitor. Transmission Data 9FH 80H 60H 4EH 00H CKS The plasma monitor returns the following ACK when the power is switched on. 3FH 60H 80H 4EH 00H CKS NOTE: Do not set the Power ON or Power OFF command continuously.
- Page 10 08H : UNDERSCAN 09H : 14:9 08. AUTO PICTURE Select Function The external control equipment switches on or off the AUTO PICTURE of the plasma monitor. Transmission Data DFH 80H DATA00 : USER PICTURE Gain Flag DATA01 : AUTO PICTURE Select Flag 09H...
- Page 11 84VP5/84VM5 Installation Guide (also a reference for optional Quad Mount used with 42VM5 or 42VP5) 09. CINEMA MODE Set Function The external control equipment switches on or off the CINEMA MODE of the plasma monitor. Transmission Data DFH 80H C1H 01H...
- Page 12 00H : SPLIT 01H : BLANKING 11.MULTI MODE Request Function External control apparatus can know the MULTI MODE information on a plasma monitor. Transmission Data 1FH 80H 60H 3BH 00H CKS 7FH 80H 60H 3BH 02H DATA00 DATA01 DATA02 CKS...
- Page 13 *DATA01: Please set up FFH, when you publish this command from external control apparatus. A master PSS data. As compared with its own PSS data, the plasma monitor after the master which received this command sets up the data of the larger one, and equips the output of a command with it.
- Page 14 Bit2: Power Status 0:POWER 1:POWER OFF(STANBY) Bit3: 0: Fixed Bit4: 0: Fixed Bit5: 0: Fixed Bit6: 0: Fixed Bit7: 0: Fixed www.necvisualsystems.com NEC Solutions (America), Inc. (using four 42VM5 or 42VP5 Plasma Displays) Visual Systems v1.3 Page 14 of 14...