Makita 9564PC Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Spiral Bevel Gear 38 and Ball Bearing 6201DDW
DISASSEMBLY
Spiral bevel gear 38 and Ball bearing 6201DDW are disassembled as illustrated in Figs. 13 to 17(A).
Fig. 13
Remove M4x16 Hex socket
had Bolts. And then remove
Bearing box from Gear housing
complete.
M4x16 Hex socket head bolt
with adhesive: 4 pcs.
Fig. 15
Spiral bevel gear 38
can be removed.
Spiral bevel
gear 38
Fig. 17
Remove Ball bearing 6201DDW by striking
Bearing box straight down against flat surface
of work bench.
Fig. 13A
Strike the specific position with Plastic
hammer as illustrated below, if it is
difficult to remove the Bearing box by
hand in the step of Fig.13.
Bearing
box
Bearing box
Fig. 16
Fit the protrusions of 1R340 into the groove of Bearing retainer.
And turn it counterclockwise. Now Bearing retainer is removed
from Bearing box.
Bearing
retainer
Fig. 17A
Ball bearing
6201DDW
1R340
1R041
Fix Bearing retainer with Vise
and 1R041.
If cannot be removed, use arbor press and a round bar for arbor
of an appropriate size as illustrated below.
P 5 / 10
Fig. 14
Remove Spindle with Arbor
press.
Bearing box
Spindle
1R217
Labyrinth ring
Bearing
retainer
Ball bearing 6201DDW
Ball bearing
6201DDW