Makita 9564PC Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature, Spiral Bevel Gear 11 (Cont.)
DISASSEMBLY
(2) Disassemble Spiral bevel gear 11 and Armature in the order of Figs. 4 to 9.
Fig. 4
After removing Tapping screws, separate Gear housing complete with
Gear housing cover from Motor housing.
Armature comes with Gear housing cover.
4x28 Tapping Gear housing
screw: 4pcs. complete
Gear housing
cover
Motor housing
Fig. 6
Remove Spiral bevel gear 11
with 1R269.
Gear housing cover
Spiral bevel gear 11
Fig. 9
Remove Armature with arbor press.
Gear housing
complete
Armature
Fig. 7
Remove Lock spring 12
by turning it counterclockwise.
1R269
Gear housing cover
Armature
Fig. 5
Remove Hex nut M6 by turning
it counterclockwise. And take off
Flat washer 6.
Hex nut M6
Gear housing
cover
Fig. 8
Lock Spring 12
P 3 / 10
Wrench 10
Flat washer 6
Spiral bevel gear 11
Remove Retaining ring S-12
with 1R291.
Retaining ring S-12
1R291