Makita 9564PC Technical Information page 2

R
epair
CAUTION: Unplug the machine and remove the wheel, the wheel cover, the inner flange and
the outer flange from the machine for safety before repair/ maintenance in
accordance with the instruction manual!
[1] NECESSARY REPAIRING TOOLS
Code No. Description
1R217 Ring 22
1R268 Spring pin extractor M3
1R269 Bearing extractor
1R291 Retaining ring S and R pliers
1R340 Bearing retainer wrench
1R350 Ring 60
[2] LUBRICATION
Apply Makita grease SG No.00 to the portions designated with the black triangle, and apply Molybdenum
disulfide lubricant to the portions designated with gray triangle to protect parts and product from unusual abrasion.
Item No. Description
3 Gear housing complete
6 Spiral bevel gear 11
8 Lock spring 12
Fig. 1
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature, Spiral Bevel Gear 11
DISASSEMBLY
(1) Disconnect Carbon brush from Armature's commutator as illustrated in Figs. 2 and 3.
Fig. 2
Disassemble Rear cover (L and R)
from Motor housing by unscrewing
4x40 Tapping screws.
4x40 Tapping screw: 3 pcs.
Rear cover (L)
Rear cover (R)
Holding Bearing box when removing Spiral bevel gear 38
Removing Pin for shaft lock
Removing Ball bearing 627DDW from Armature shaft
Removing / Assembling Retaining ring S-12 from / to Armature shaft
Removing / Assembling Bearing retainer
Holding Gear housing complete when removing Pin for shaft lock
Gear room: Apply approx. 15g.
Inside
3
Fig. 3
Shift the tail of Spiral spring
from the top of Carbon brush to
the side notch of Brush holder.
Use for
Portion to lubricate
6 8
P 2 / 10
Disconnect the Carbon brush from
Armature's commutator by pulling.