Wiring Diagram - Makita 9564PC Technical Information

W
iring diagram
( Belly Side of Motor housing)
Fig. D-4
Fix Controller's lead wire (black)
and that of (blue or white) with Lead
wire holder.
Controller's lead wire (blue or white)
Controller's lead wire (black)
Controller's lead wire (black)
Noise suppressor's lead wire (white)
Controller's lead wire (blue or white)
Connect Insulated
connectors to Switch,
and vend the Insulated
connecters as illustrated
right in order to push
the lead wires into the
space between ribs.
Noise suppressor
Bottom View of Switch
(Opposite side of Switch Button)
Noise suppressor
Fix the following lead wires with the notch of Switch as illustrated above.
* Controller's lead wire (blue or white)
* Controller's lead wire (black)
* Noise suppressor's lead wire (white)
Switch button
Switch
Switch button
Switch
Put Lead wires of Power supply cord to
the inside of ribs near Switch.
P 10 / 10
Switch