Preparing The Machine / Using The Machine; Attaching The Foot Control; Waste Collector - JUKI MO-1000 Instruction Manual

Preparing the machine / Using the machine

运转前准备 / 使用操作机器
11

Attaching the foot control

Plug foot control into the machine socket (A) and then into main
socket (B). The foot control regulates the sewing speed. The sewing
speed can be adjusted by increasing or decreasing the pressure on
the foot control.
"WARNING''
This appliance has a polarized plug (one blade wider than the other).
B
To reduce the risk of electric shock, this plug is intended to fit in a po-
A
larized main socket only one way.
If the plug does not fit fully in the polarized main socket, reverse the
plug. If it still does not fit, contact a qualified electrician to install the
proper polarized main socket. Do not modify the plug in any way. (for
USA, Canada only)
脚踏控制器的连接
将脚踏控制器的插头插入机器上的插座（A）并将其插入电源插座 ( B） 。
该脚踏控制器可控制缝制速度。用脚控制速度，踩浅为慢速，踩深为
快速。

Waste collector

Clip the waste collector into the opening on the looper cover. It catch-
es the cut-off fabric as you sew, keeping your working area neat and
tidy.
集尘器
将集尘器夹置在弯针罩板前。它可将你在缝制过程中产生的废料垃圾
收集起来，以保持你工作区域的整洁。