Preparing The Machine; Foot Control; Thread Stand - JUKI MO-204D Instruction Manual

Preparing the machine

7
Attaching the foot control
Plug foot control into the machine socket (A) and then into the main
socket (B). The foot control regulates the sewing speed. The sewing
speed can be adjusted by increasing or decreasing the pressure on
the foot control.
CAUTION:
Be sure to turn OFF the power switch before plugging/unplug-
ging the controller.

Thread stand

Push the support rod firmly into the socket on the back of the ma-
chine. Raise the support rod (C) fully, turning slightly until the po-
sition catches engage. Position the thread guide (D) on the thread
stand so that the arrow is to the front.