Clarion CMS5 Owner's Manual page 35

Audio Settings
Source Volume Control (SVC)
1. Press the Audio Button
2. Press in on the volume knob to switch through Sources. Each Press of the volume knob will advance
you to the next Source.
3. Adjust the Source Volume by rotating the volume knob
4. Once the Source Volume has been adjusted, Press in on the volume knob to switch to the next Source
5. Press the Back Button to return to the Audio Settings Carousel when finished
Subwoofer
1. Press the Audio Button
2. Use the volume knob to scroll until the Subwoofer Icon is in the middle
3. Press in on the volume knob to select Subwoofer
4. Rotate the volume knob to adjust the Subwoofer Volume (-10 to +10)
5. When you have completed adjusting the Subwoofer Volume, press in on the volume knob
6. You will see the halo around the Frequency adjustment slider
7. Rotate the volume knob to adjust the Frequency
8. When you have completed adjusting the Frequency, press in on the volume knob
9. You will see the halo around the Subwoofer Phase
10. Rotate the volume knob to move the halo around Normal or Reverse
11. Press in on the volume knob to select Normal or Reverse Phase (Default = Normal)
12. Press the Back Button to return to the Audio Settings Carousel
68 CMS5
Audio Settings
2-Zone
1. Press the Audio Button
2. Use the volume knob to scroll until the 2-Zone Icon is in the middle
3. Press in on the volume knob to select 2-Zone
4. Rotate the volume knob to adjust the volume level (-10 to +10) for All Zones (Zone 1 + Zone 2)
5. When you have completed adjusting the volume level for All Zones, press in on the volume knob
6. You will see the halo around the Zone 1 volume adjustment slider
7. Rotate the volume knob to adjust the Zone 1 volume level (-10 to +10)
8. When you have completed adjusting the Zone 1 volume level, press in on the volume knob
9. You will see the halo around the Zone 2 volume adjustment slider
10. Rotate the volume knob to adjust the Zone 2 volume Level (-10 to +10)
11. When you have completed adjusting the Zone 2 volume Level, press in on the volume knob
12. You will see the halo around the Reset Button. If you select Reset, all adjustments will adjust back to
the default level (0)
13. Press the Back Button to return to the Audio Settings Carousel
Note:
When 2-Zone is ON you cannot select USB as a Front and Rear Source at the same time.
CMS5 69