Audio Settings (Button) - Clarion CMS5 Owner's Manual

Audio Settings
Audio Settings
1. Press the Audio Button
2. Use the volume knob to scroll through the Audio Settings Carousel
3. Press in on the volume knob to select the Audio Settings you would like to adjust
- Treble / Mid / Bass (Adjust the Treble, Mid and Bass levels from -10 to 10)
- Balance / Fader (Adjust the sound position from 0 to 60 from Left to Right and Front to Rear)
- Equalizer (Adjust the frequency from -10 to 10 and level for 5-bands)
- Source Volume Control (SVC) (Adjust the volume level for each source from 0 to 60)
- Subwoofer (Adjust the Volume from 0-60, Frequency and Phase from -10 to 10)
- 2-Zone (Adjust the volume from 0-60 for Zone 1, Zone 2 and Both)
Treble / Mid / Bass
1. Press the Audio Button
2. Use the volume knob to scroll until the Treble/Mid/Bass Icon is in the middle
3. Press in on the volume knob to select Treble/Mid/Bass
4. Rotate the volume knob to adjust the Tweeter level (-10 to +10)
5. When you have completed adjusting the Tweeter level, press in on the volume knob
6. You will see the halo around the Mid sound adjustment slider
7. Rotate the volume knob to adjust the Mid Level (-10 to +10)
8. When you have completed adjusting the Mid level, press in on the volume knob
9. You will see the halo around the Bass sound adjustment slider
10. Rotate the volume knob to adjust the Bass Level (-10 to +10)
11. When you have completed adjusting the Bass Level, press in on the volume knob
66 CMS5
Audio Settings
Balance / Fader
1. Press the Audio Button
2. Use the volume knob to scroll until the Balance/Fader Icon is in the middle
3. Press in on the volume knob to select Balance/Fader
4. Rotate the volume knob to adjust the Balance Level (Left, Center, Right)
5. When you have completed adjusting the Balance level, press in on the volume knob
6. You will see the halo around the Fader Level adjust met slider
7. Rotate the volume knob to adjust the Fader Level (Front, Center, Rear)
8. When you have completed adjusting the Fader level, press in on the volume knob
9. You will see the halo around the Reset Button. If you select Reset, all adjustments will Adjust back to
the default level (0)
10. Press the Back Button to return to the Audio Settings Carousel
Equalizer
1. Press the Audio Button
2. Press in on the volume knob to switch Equalizer Bands. Each Press of the volume knob will advance
you to the next Equalizer Band
3. Adjust the Equalizer Band by rotating the volume knob
4. Once the Equalizer Band has been adjusted, Press in on the volume knob to switch to the next Band
5. If you would like to reset the Equalizer, Press in on the volume knob until the halo is around the
Defeat Icon. Then Press in on the volume knob to reset the Equalizer back to Flat (level = 0)
6. Press the Back Button to return to the Audio Settings Carousel when finished
CMS5 67