Table of Contents
Advertisement
To change the PATCH setup, press the
changed between 4Pr mode and 12Pr mode. The
following:
4.2) LED display contrast adjustment: the
following:
Adjust the
BANK/PROGRAM
contrast has a range of between 0 (minimum) and 15 (maximum).
5. To save, press the
FCB8N will return to operating mode.
Edit Mode
On power-up the FC8BN defaults to operating mode. To change to edit mode:
1. Select the PATCH you want to edit.
2. Enter Programming Mode.
3. Press the
EDIT
4. All Programming Menu LED's will be off and the
are in Edit mode. To see associated sub-menus please press and hold
5. Scroll up and down the sub-menus by pressing
<<PREV
to see previous sub-menu.
INC+
4.Pr
Cont.
display contrast by pressing
SAVE
switch, or to exit without saving press the
(Please see Programming Mode Entry section)
switch, the
BANK/PROGRAM
Edit
P1.CH
P2.CH
P3.CH
CC.CH
C1.CC
C2.CC
C3.CC
C4.CC
C5.CC
C6.CC
C7.CC
C8.CC
PEAK FCB8N: Programmable MIDI foot controller
or
DEC-
switches. The PATCH setup will be
BANK/PROGRAM
12.Pr
BANK/PROGRAM
display will show the
INC+
or
display will show the following:
EDIT LED
will be flashing. This means you
NEXT>>
to see the next sub-menu or
P1.PC
P2.PC
P3.PC
C1.dt
C2.dt
C3.dt
C4.dt
C5.dt
C6.dt
C7.dt
C8.dt
display will show the
DEC-
switches. The
CANCEL
switch. The
MENU
switch.
Page 9 of 14
Advertisement
Table of Contents
