PEAK FCB8N: Programmable MIDI foot controller
MIDI Cable Support
The FCB8N is a standard MIDI foot controller that can be connected to any MIDI equipment via a
standard 5 pin MIDI cable.
Phantom power into the FCB8N unit via a 7 pin midi cable requires pins 6 and 7 for the power supply.
The polarity is not important.
Phantom power into the FCB8N unit via a 5 pin midi cable requires pins 2 (ground) and 3 (positive) for
the power supply.
NOTE: A PCB Jumper must be moved to enable this.
Please read your MIDI device's instructions before enabling the phantom power.
Page 14 of 14