Table of Contents
Advertisement
Copy Mode
Copy mode allows you to copy the current PATCH to any other PATCH. All the settings for the PATCH are
copied to the new PATCH. To copy a PATCH:
1. Select the PATCH that you want to copy.
2. Enter to Programming Mode.
3. Press the
COPY
3. All Programming Menu LED's will be off and the source PATCH LED will be flashing.
4. If the destination PATCH is in the same BANK as the source PATCH then push the PATCH
switch for the required PATCH twice
If the destination PATCH is in a different BANK, select the required BANK by using the
UP
and
BANK DOWN
the PATCH switch for the required PATCH.
5. Save the copied PATCH by pressing the
the flashing LED switch.
EXP Mode
The expression pedal can be assigned to any Control Change Number on any MIDI channel for each
individual PATCH. To assign the expression pedal:
1. Select the PATCH you want to assign expression pedal to.
2. Enter to Programming Mode.
3. Press
EXP
switch, the
4. All Programming Menu LED's will be off and the
5. Press and hold the
6. Scroll up and down the sub-menus by pressing
<<PREV
to see previous sub-menu:
Once a menu item has been selected, press the
changed. Use the
0
127: Toggles the value between 0 and 127 on each successive press of the INSTANT
ACCESS switch.
(Please see Programming Mode Entry section)
switch, the
BANK/PROGRAM
CoPY
switches (the
BANK/PROGRAM
(Please see Programming Mode Entry section)
BANK/PROGRAM
ExP
MENU
switch.
E1.CH
E1.CC
INC+
and
DEC-
switches to increment and decrement the value.
PEAK FCB8N: Programmable MIDI foot controller
display will show the following:
display will flash) and then press
SAVE
switch or exit from COPY mode by pressing
display will show the following:
EXP
LED will be flashing.
NEXT>>
to see the next sub-menu or
dAtA
ENTER
switch to access the value to be
BANK
Page 11 of 14
Advertisement
Table of Contents
