Kurzweil PC3x Service Manual page 58

Troubleshooting & Maintenance
Rebuilding the Internal NAND Flash Memory
9. Press the SETUP SYSTEM soft button. A message File structure built will appear
10. The first line should display, Choose a synth executable file:. Use the Alpha
11. The top line should now display, Choose a diags executable file:. Select the
12. The top line should now display, Choose a system objects file:. Select the PC3
13. Press the Quit soft button then press the <back> soft button on the next menu. The
14. Press the RUN PC3 soft button. The PC3x should boot up normally.
4-8
• PC3 Operating System file, PC3OS111.BIN or higher
• PC3 Diagnostics file, PC3DG018 or higher
• PC3 Objects file, PC3OB111.PC3 or higher
briefly then another menu.
Wheel to select the PC3 Operating System file then press the CHOOSE soft button.
Installation will take about five seconds.
Diagnostics file, then press the CHOOSE soft button. Installation will take only a second or
two. A message Bootable system built. displays briefly then a new menu will
display.
Objects file then press the CHOOSE soft button. Installation will take about 10 seconds. A
message System objects installed. displays briefly then the root menu will
display.
normal Boot Loader menu should now be displayed.