Wheels Assembly (Not Shown) - Kurzweil PC3x Service Manual

Introduction
PC3x Front Panel
Alpha Wheel—use the Alpha Wheel to increase or decrease a value by one or several
increments.
Plus (+) and Minus (–) buttons—these buttons operate similar to the Alpha Wheel. Pressing the
Plus (+) or Minus (-) button allows you to increase or decrease a value by one. Pressing these
buttons simultaneously, selects the Jump function.
Alphanumeric Keypad—use these buttons to enter characters (both uppercase and lowercase),
numbers, and spaces. Pressing these buttons simultaneously, selects the Panic button. Select the
Panic button to send an All Notes/All Controllers Off message on all 16 channels.
Storage Active LED—this blue LED is lit when an xD daughter card is installed and there is
activity. (Do not remove the xD card when the blue LED is lit.)

Wheels Assembly (not shown)

Pitch and Mod Wheels—use these wheels to vary modulation and pitch. In some programs, the
Mod Wheel can be used for other functions.
ARP button—use this button to active the Arpeggiator.
SW button—this button can be programmed for a variety of functions.
1-5