Lcd And Front Panel Buttons; Test Results - Kurzweil PC3x Service Manual

Diagnostics
Entering Diagnostics
3. The LCD flashes the message:
4. The LCD displays the following:
5. The bottom line in the display shows the four test modes. Press the soft button below the

LCD and Front Panel Buttons

The LCD displays the list of tests, test modes, actions, and test results.
Press the Left, Right, Up, or Down cursor buttons or turn the Alpha Wheel to navigate through
the available tests.
Use the soft buttons located below the LCD to select different test modes or actions.
Press the Exit button to return to the Boot Loader.

Test Results

At the completion of an individual test, the LCD displays the results of the test. Figure 2-3 shows
an example of the display for the SDRAM refresh test.
2-2
Running SDRAM refresh test
RAM Test Passed
Figure 2-2 LCD example, diagnostic main menu
test mode to run the tests.
Running SDRAM refresh test
RAM Test Passed
Figure 2-3 LCD example, SDRAM refresh test
Running ROM-based diagnostics
OK
OK
.