Replacing the touch pad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Place the touch pad on the palm-rest assembly.
2
Slide the tabs on the touch-pad bracket into the slots on the palm-rest
assembly.
3
Align the screw holes on the touch-pad bracket with the screw holes on
the palm-rest assembly.
4
Replace the screws that secure the touch-pad bracket to the palm-rest
assembly.
5
Adhere the tape over the touch-pad bracket.
6
Connect the touch-pad cable to the touch pad.
Post-requisites
1
Replace the
2
Replace the
3
Replace the
4
Replace the
5
Replace the
6
Follow the procedure from step 3 to step 5 in "Replacing the
7
Follow the procedure from step 3 to step 7 in "Replacing the
8
Follow the procedure from step 4 to step 5 in "Replacing the
drive".
9
Replace the keyboard.
10 Replace the battery.
72
system
board.
heat-sink
assembly.
IO
board.
wireless
card.
memory
module.
computer. After working inside your
After working inside your
hard
drive".
base
cover".
optical