Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Slide the display cable into the connector on the display back-cover and
close the latch to secure the cable.
2
Adhere the tape that secures the display cable to the display back-cover.
3
Turn the display panel over and place it on the display back-cover.
4
Align the screw holes on the display panel with the screw holes on the
display back-cover.
5
Replace the screws that secure the display panel to the display back-
cover.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Replace the
system
4
Replace the
heat-sink
5
Replace the
IO
6
Replace the
wireless
7
Replace the
memory
8
Follow the procedure from step 3 to step 5 in "Replacing the
9
Follow the procedure from step 3 to step 7 in "Replacing the
10 Follow the procedure from step 4 to step 5 in "Replacing the
drive".
11 Replace the keyboard.
12 Replace the battery.
88
computer. After working inside your
bezel.
assembly.
board.
assembly.
board.
card.
module.
After working inside your
hard
drive".
base
cover".
optical