Removing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the battery.
2
Follow the procedure from step 1 to step 3 in "Removing the
drive".
3
Remove the keyboard.
4
Follow the procedure from step 1 to step 5 in "Removing the
5
Follow the procedure from step 1 to step 3 in "Removing the
6
Remove the
7
Remove the
8
Remove the
9
Remove the
10 Remove the
Procedure
1
Remove the screw that secures the power-adapter port to the palm-rest
assembly.
2
Note the power-adapter port cable routing and remove the cable from its
routing guides.
computer. After working inside your
memory
module.
wireless
card.
IO
board.
heat-sink
assembly.
system
board.
After working inside your
optical
base
cover".
hard
drive".
73