Installation
Component video device
COMPONENT
How to use
A
Turn on the DVD player, and insert a DVD disc.
B
INPUT button on the remote control to
Use the
select component mode.
C
PLAY button on the DVD player for
Press the
program play.
D
Refer to the DVD player's manual for operating
instructions.
Component Input ports
Q
To get better picture quality, connect a DVD player to
the component input ports as shown below.
Component ports on the TV
Video output ports on DVD
player
Connecting a DTV (digital TV)
This TV can receive Digital Over-the-air TV signals without
an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital
external device, such as a cable box, refer to the figure
below.
EN-9
Haier LED HDTV
Component video cable:
Green=Y
Blue=CB/PB
Red=CR/PR
Audio cable:
White=Left audio
Red=Right audio
Back of TV
Y
Pb
Pr
Y
Pb
Pr
Y
B-Y
R-Y
Y
Cb
Cr
Y
P
P
b
r
How to connect
•
Use the TV's COMPOSITE, COMPONENT or HDMI jack
for video connections, depending on your set-top
box connector. Then, make the corresponding audio
connections.
How to use
A
Turn on the digital set-top box. (Refer to the owner's
manual for the digital set-top box.)
B
Use INPUT on the remote control to select
COMPONENT, VGA or HDMI source.
Connecting a digital audio output
Send the TV's audio to external audio equipment (stereo
system) via the Digital Audio Output (Optical) port.
How to connect
A
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
B
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
See the external audio equipment instruction
manual for operation.
Note
When connecting with external audio equipments,
R
such as amplifers or speakers, please turn the TV
speakers off.
!
Caution:
•
Do not look into the optical output port. Looking
at the laser beam may damage your vision.