Ejecting The Film Holder - Nikon LS-4500AF User Manual

Ejecting the Film Holder

• When the Eject button on the front panel of the unit is pressed, the film
holder will be ejected. You can then remove the holder from the slot by
hand.
• When using driver software which has an eject function, the film holder
can be activated by the host computer.
• The LS-4500AF does not perform automatic ejection when a scanning
operation is completed. If the power has been turned off while the film
holder is still loaded, turn the power on again. The film holder will be
ejected by the initializing operation.
Nikon
Film Scanner LS-4500AF User's Manual
Eject Button
5. Operation
25