Turning Off Lane Departure Warning; Lane Departure Warning Off Indicator Light - Subaru 2016 Outback Owner's Manual

Hide thumbs Also See for 2016 Outback:
Table of Contents

Advertisement

Lane Departure Warning

Turning off Lane Departure Warning

Press and hold the Lane Departure Warning OFF switch for approximately 2 seconds or
longer to turn off the Lane Departure Warning. When 1 short beep sound emits, this function
is turned off and the Lane Departure Warning OFF indicator light on the instrument panel
will illuminate.
To turn the function back on, press and hold the Lane Departure Warning OFF switch again
for approximately 2 seconds or longer. When the function is turned on, the Lane Departure
Warning OFF indicator light turns off.
• When the Lane Departure Warning is turned off, the Lane Sway Warning is
also turned off.
• The engine is turned off. The conditions prior to turning off the engine are
preserved and restored after starting the engine again.

■ Lane Departure Warning OFF indicator light

This indicator illuminates when the ignition
switch is turned to the ON position, and then
approximately 7 seconds after the engine
starts, it turns off or remains illuminated
depending on the current status (ON or OFF).
It turns on when the Lane Departure Warning
is turned off.
It also illuminates under the following condi-
tions.
• When the EyeSight system has a malfunc-
tion
Refer to page 86.
• When the EyeSight system has stopped temporarily
Refer to page 87.
70
NOTE
S01122
S01123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents