Operation Of Adaptive Cruise Control - Subaru 2016 Outback Owner's Manual

Adaptive Cruise Control
When a vehicle in front is detected, a buzzer
sounds 1 short beep and the lead vehicle indi-
cator will illuminate.
green.
The vehicle tracks the lead vehicle in front
and maintains the selected following distance.
At this time, the speed upper limit is the set
vehicle speed. If the vehicle in front is no lon-
ger detected, a buzzer sounds 1 short beep
and the lead vehicle indicator turns off.
(green) will turn white.
The buzzer sound (lead vehicle acquisition sound) that occurs when a vehicle
in front is detected or no longer detected while Adaptive Cruise Control is set
can be turned off by customization.
⇒
Refer to page 89.

Operation of Adaptive Cruise Control

• When no vehicle in front is detected
The vehicle drives constantly at the set tar-
get vehicle speed between approximately
25 MPH (40 km/h) and 90 MPH (145 km/h).
• When a vehicle in front is detected
The vehicle tracks the lead vehicle in front,
and will maintain the chosen following dis-
tance (there are four settings), up to the set
target vehicle speed - between 25 MPH (40
km/h) and 90 MPH (145 km/h).
40
(white) will turn
NOTE
S01113
S01979
S01980