Subaru 2016 Outback Owner's Manual page 79

Conventional Cruise Control
(4) When the vehicle speed is between approximately 25 MPH (40 km/h) and 90 MPH (145
km/h), press the RES/SET switch to the "SET/-".
The vehicle speed at the time the switch is pressed becomes the set vehicle speed, and
constant-speed driving is engaged.
and the set vehicle speed are displayed on the EyeSight display area.
The "brake more" warning will not activate while Conventional Cruise Control
is functioning.
During Conventional Cruise Control use, accelerator and brake control to
track the vehicle in front is not performed. Operate the accelerator and brake
pedals as necessary.
• On a downhill grade, automatic braking may operate in order to maintain
the set vehicle speed.
• When driving on a curve, the vehicle may not accelerate, or may deceler-
ate, even if the set speed is higher than the current vehicle speed.
• To return to Adaptive Cruise Control use, cancel the Conventional Cruise
Control and then briefly press the
switch.
78
S01986
WARNING
CAUTION
NOTE
/ (following distance setting)
S01130