Playing A Disc - Sanyo CDP-4000 Instruction Manual

PLAYING A DISC
- Be sure to reduce the volume before To remove the disc
connecting or disconnecting the Remove the disc while pressing the pivot.
headphones. 4. Close thedisc compartment lid.
BASIC CD PLAY
Button illumination
1.
2.
3.
Connect the remote control and
The button pressed most recently (the
headphones, then plug the cord from
STOP, ANTI ROLLING SHOCK or PIAY/
the remote control into the PHONES PAUSE button) lights for amxoximatelv
socket.
Slide the OPEN switch left to open
the disc compartment lid.
Hold the disc with the labeled side
UCIand Dress it onto the Divot until it
"clicks'; into place.
*
6.
0
7.
WARNING!
\\
Do not insert your fingers into the opened 8.
panel. You may damage the unit or cause
personal injury.
Do not allow young children to operate .
the unit unattended.
10 seconds wh& using the installed
battery.
The button remains lit when using the AC
adaptor or cigarette lighter ada~tor,
5. 'Press th; PLAY/~AUSE button to
begin play.
Track number
Elapsed
playing time
m
TRACK MIN SEC
The track number and elapsed play-
ing time for the current track are
displayed.
Adjust the VOLUME control as
desired.
To stop play temporarily, press the
PLAY/PAUSE button. The display
blinks. Press the PLAY/PAUSE but-
ton again to resume.
To stop play, press the STOP button
once. The total number of tracks and
total playing time appear
To turn the power off, press the STOP
button once again.
10