Table of Contents
Advertisement
Bass expander
system
Set the BASSXPANDER switch to ON to
~
If the operating
buttons
do not
enhance the bass sound.
Auto power on function
The power turns on automatically when
PIAY/PAUSE
button is pressed
Auto power off function
The power turns off automatically after
about 1 minute when all tracks on a disc
have been played or when the STOP
button is pressed once to stop play.
Hold function
The HOLD switch disables the buttons
from operating to prevent play from start-
ing or stopping due to accidental opera-
tion. For normal use, leave the switch in
the off position.
To prevent battery drain:
Set the HOLD switch to the on position
when carrying the unit in a bag. The
PLAY/PAUSE
button will not function
even if the button is pressed accidentally.
"00 0000 HOLD" appears briefly on the
display.
@&&#l
[
2.
3.
Check whether the HOLD switch is
on or not.
Remove the batteries and/or dis-
connect the AC adaptor from the
unit. Wait a few seconds, then rein-
stall the batteries or reconnect the
AC adaptor.
If the buttons still do not function,
insert new batteries or charge the
rechargeable battery.
To prevent play from being interrupted:
Set the HOLD switch to the on position
after starting play. "HOLD" appears.
Advertisement
Table of Contents
