Playing A Disc; Basic Operation - Sanyo CDP-MT500 Instruction Manual

BASIC OPERATION

(MUSIC CD) (MP3 CD)
• Be sure to reduce the volume before connecting or disconnecting the headphones.
1. Connect the remote control and headphones, then plug the cord from the remote
control into the PHONES socket.
2. Set the Function switch to CD.
3. Slide the OPEN switch right to open the disc compartment lid.
4. Hold the disc with the labeled side up and press it onto the pivot until it "clicks" into
place.
WARNING!
Do not insert your fingers into the opened panel. You may damage the unit or cause
personal injury.
Do not allow young children to operate the unit unattended.
To remove the disc
Remove the disc while pressing the pivot.
4. Close the disc compartment lid.
5. Press the POWER ON/ i button to begin play.

PLAYING A DISC

12