Figure 3-1 The Add New Motomesh Duo Device Panel In Meshmanager; Figure 3-2 Entering The 802.11 Ap Ethernet Mac Address In Meshmanager; Procedure 3-1 Configuring A 4300 Device Mesh - Motorola MOTORMESH 4300 User Manual

Chapter 3: Device Configuration

Procedure 3-1 Configuring a 4300 Device Mesh

Ensure that all the 4300 devices are wire-connected to the MOTOMESH 2.0 MiSC. NOTE: It is
1
recommended that the 4300 devices are set-up on the bench prior to actual deployment in the field.
The MOTOMESH 2.0 MeshManager element management application must be installed and running.
2
3
From within MeshManager select the
select File | Add MotoMesh Duo Device from the application menu.
The Add New MOTOMESH Duo Device panel will now be shown in MeshManager.
4
Figure 3-1
Enter the 4300 Device's 802.11 Ethernet MAC address, from the external device's label, into the 802.11
5
AP Ethernet entry field.
Figure 3-2
July 2007
The Add New MOTOMESH Duo Device Panel in MeshManager
Entering the 802.11 AP Ethernet MAC Address in MeshManager
Add MotoMesh Duo Device icon from the Toolbar menu, or
3-2