Infrastructure Device Assembly - Motorola MOTORMESH 4300 User Manual

Nikon network hardware user manual
Table of Contents

Advertisement

Chapter 2: Infrastructure Device Installation

Infrastructure Device Assembly

Figure 2-4 shows the external connection points for a MOTOMESH Duo 4300 device. The figure
below it shows some examples of optional personality plugs (Black – Canopy Connect PoE, and
Standards based 802.3 af PoE Grey). A red Hardware Reset Plug (not shown below) is also available
and is used to reset a stranded 4300 device back to its factory default configuration.
Figure 2-4
N-Type Antenna
(2.4)
Power ON
Indicator Light
Gore Vent
An optional External
Personality Plug are
connected here
ONLY if the
Standards based
802.3af PoE or
Canopy PoE (option)
is purchased. If
neither PoE is
purchased, the port
will be covered.
Figure 2-5
July 2007
Infrastructure Device Top View showing External Connection Points
A
External Personality Plugs (Black, Grey, Red, or none)
NOTE: An optional red Hardware Reset Plug (not
shown above) is used to reset a stranded 4300 device
back to its factory default configuration. The plug looks
similar to the other Personality Plugs shown above, but
it is in red.
B
Device Hinges
2-6
N-Type Antenna (4.9,
N-Type Antenna (5.8)
N-Type Antenna (5.8)
5.4, or 5.8)
Optional PoE feature port.
Ethernet Port
Power
Black plug for use
with the Canopy
Connect PoE option.
Grey plug for use with
the Standards based
802.3af PoE option.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motomesh duo 2.0 4300

Table of Contents