Table of Contents
Advertisement
Product Introduction
Antenna Type
Antenna Connector
Routing
Routing Engine
Routing Protocol
IEEE 802.11s Support
Network
Network Management Software
Network Interface
Network Segmentation
Quality of Service (QoS)
Security
Virtual LAN (VLAN)
Client Encryption Support
Internodal Encryption
Authentication
Power
Power Requirements
Power Connector
Power Consumption
Power over Ethernet (PoE)
Physical
Dimensions
Weight
Packaging
Mounting
Environment
Temperature Range
Humidity
Certifications
July 2007
Two (2) omni directional, 8 dBi (for 2.4 GHz Radio) and 10 dBi (for 5.8
GHz Radio)
N-Type
MeshConnex Layer 2 routing with Layer 1 situational-awareness
Patented, hybrid proactive/reactive routing (low latency & fast route
convergence)
Upgradeable to IEEE 802.11s standard via OTA software updates
MeshManager Element Management System via secure SNMP v.3
10/100Mbps Ethernet (RJ-45) port with surge suppression
Multiple SSIDs with VLAN mapping
802.11e, EDCF, 802.11p and the IP precedence of DSCP (ToS) bits
Supports up to sixteen (16) per node, or 4094 per network
WEP, WPA (TKIP) and WPA2 (AES, 802.11i)
Intra-Mesh Security
802.1X (Infrastructure/Client) and MAC address hardware authentication
90-264 VAC (with +/- 20% variation at 47 to 63 Hz)
12V +/- 10% VDC input, certified LPS power supply (orderable option)
AC power cord, 12 ft
15W (with both radios operating)
22.2W (with Canopy® Connect PoE operational)
29.4W (with IEEE 802.3af Standard PoE device)
Canopy and IEEE 802.3af support available
9"x 6"x 3.5" (23.1cm x 15.2cm x 8.9cm)
4.5 lbs (2.04kg)
Outdoor, all-weather enclosure (NEMA 4)
3" (7.62cm) diameter post mounting
-30 to +60 °C
0 to 95%, non-condensing
FCC Part 15 & 90, UL, CSA
1-6
Advertisement
Table of Contents
