JVC GY-HM790U Service Manual page 26

--- DIP SW 5/8 ---
DIP SW 32
DIP SW 33
DIP SW 34
DIP SW 35
DIP SW 36
DIP SW 37
DIP SW 38
DIP SW 39
BACK
--- DIP SW 6/8 ---
DIP SW 40
DIP SW 41
DIP SW 42
DIP SW 43
DIP SW 44
DIP SW 45
DIP SW 46
DIP SW 47
BACK
--- DIP SW 7/8 ---
DIP SW 48
DIP SW 49
DIP SW 50
DIP SW 51
DIP SW 52
DIP SW 53
DIP SW 54
DIP SW 55
BACK
--- DIP SW 8/8 ---
DIP SW 56
DIP SW 57
DIP SW 58
DIP SW 59
DIP SW 60
DIP SW 61
DIP SW 62
DIP SW 63
BACK
Refer to 5.1.5 ADVANCED FUNCTION Menu because the oper-
ations are almost the same.
NOTE :
ALL DIP switches are factory use only.
These DIP switches are not used for repair or maintenance.
Therefore all DIP Switch settings which are shown below
should not be changed. And do not forget to return to the initial
position, if setting was changed.
Item
DIP SW CANCEL
ALL RE- EXECUTE
SET
DIP SW 1/8 DIP SW 0
DIP SW 1 to 7
DIP SW 2/8 DIP SW 8 to 15
1-26 (No.HC034<Rev.001>)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
0
0
0
0
0
0
0
0
Parameter
Cancel to reset all DIPSW
settings.
Execute to reset all DIPSW
settings.
0 Change prohibited.
OFF Change prohibited.
OFF Change prohibited.
Item
DIP SW 3/8 DIP SW 16 to 18
DIP SW 19 and 21 0
DIP SW 20
DIP SW 22 and 23 OFF
DIP SW 4/8 DIP SW 24 and 31 0
DIP SW 25 to 30
DIP SW 5/8 DIP SW 32 to 39
DIP SW 6/8 DIP SW 40 to 47
DIP SW 7/8 DIP SW 48 to 55
DIP SW 8/8 DIP SW 56 to 63
5.1.8 HOUR METER Menu Operation
(1) Refer to 5.1.2.3 to display the SERVICE MENU.
(2) Move the cursor to [HOUR METER], then press the [Set]
button or the [Cross-Shaped] button (right).
(3) The HOUR METER Menu is displayed.
--- HOUR METER ---
POWER
FAN
SLOT EJECT
BACK
Refer to 5.1.5 ADVANCED FUNCTION Menu because the oper-
ations are almost the same.
Item
POWER 000000 Displays the power hour meter.
CLEAR Resets the power hour meter.
FAN 000000 Displays the fan hour meter.
CLEAR Resets the fan hour meter.
SLOT 000000 Displays the slot A and B eject count.
EJECT
CLEAR Resets the slot A and B eject count.
5.1.9 ERROR HISTORY Menu Operation
NOTE :
This menu is not used.
(1) Refer to 5.1.2.3 to display the SERVICE MENU.
(2) Move the cursor to [ERROR HISTORY], then press the
[Set] button or the [Cross-Shaped] button (right).
(3) The ERROR HISTORY Menu is displayed.
--- ERROR HISTORY ---
CLEAR
BACK
Parameter
OFF Change prohibited.
OFF
Change prohibited.
OFF
OFF Change prohibited.
OFF Change prohibited.
OFF Change prohibited.
0 Change prohibited.
(Bold is the factory setting.)
000000H
000000H
A 000000
000000
B
Parameter
CANCEL