Functional Description - Bosch PST 700 PE Operating Instructions Manual

OBJ_BUCH-250-001.book Page 17 Monday, August 14, 2006 10:17 AM
Do not use the laser viewing glasses as safety
goggles. The laser viewing glasses are used for
improved visualisation of the laser beam, but they
do not protect against laser radiation.
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses do
not afford complete UV protection and reduce col-
our perception.
Never allow children to operate the machine
without supervising them. They could uninten-
tionally blind other persons.
The laser module must be removed from the
power tool when used for stationary work or
when sawing from below a workpiece. One
can easily be blinded from the laser beam when car-
rying out such work.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
Intended Use
The machine is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates and rub-
ber while resting firmly on the workpiece. It is suitable
for straight and curved cuts with mitre angles to 45°.
The saw blade recommendations are to be observed.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Thumbwheel for stroke rate preselection
(PST 800 PEL/PST 900 PEL)
2 Lock-on button for On/Off switch
3 On/Off switch
2 609 932 567 • 14.8.06
4 Vacuum hose*
5 Vacuum connection
6 Saw blade storage
7 Base plate
8 Adjusting lever for orbital action
9 Switch for sawdust blowing device
10 Nose for dust cover
11 Guide roller
12 SDS clamping lever for saw blade release
13 Sliding shoe (PST 900 PEL)
14 Saw blade*
15 Dust cover for vacuuming*
16 Contact protector
17 Stroke rod
18 Laser warning label (PST 800 PEL/PST 900 PEL)
19 Laser line On/Off switch
(PST 800 PEL/PST 900 PEL)
20 Laser module (PST 800 PEL/PST 900 PEL)
21 Splinter guard*
22 Exit opening for laser beam
(PST 800 PEL/PST 900 PEL)
23 Batteries (PST 800 PEL/PST 900 PEL)
24 Battery lid (PST 800 PEL/PST 900 PEL)
25 Latch of battery lid
(PST 800 PEL/PST 900 PEL)
26 Laser viewing glasses*
27 Screw (PST 700 PE/PST 800 PEL)
28 Base plate holder (PST 700 PE/PST 800 PEL)
29 Scale for mitre angle
30 Thumbwheel for pre-tension of base plate.
(PST 900 PEL)
31 Base plate clamping lever (PST 900 PEL)
32 Lead for the parallel guide
33 Locking screw for parallel guide*
34 Parallel guide with circle cutter*
35 Centring tip of the parallel guide*
*The accessories illustrated or described are not
included as standard delivery.
English | 17