Mpeg Status; Figure A.6: Sample Unity 500 Mpeg Status Report; Table A.8: Terms Used In U500 Mpeg Status Reports; A.2.6 Mpeg Status - Wegener unity 500 User Manual

A.2.6

MPEG Status

MPEG STATUS
Aggregate MPEG:
Available Programs:
Video
Presence:
Settings:
Audio Presence:
Audio Port Assignments: / Status:

Table A.8: Terms Used in U500 MPEG Status Reports

Term
If MPEG stream is present, shows Transport stream at
Aggregate MPEG
from
Program numbers of available programs if MPEG stream is present
Available Programs
Video
Presence
NTSC
Settings
NORMAL
Otherwise, any non-muted states will be shown.
Shows 3-character designator for each audio program contained within the current
Audio Presence
program, if MPEG stream is present.
Only one audio port is possible in the..
Audio Port
The audio program that was specified for the audio port. If the unit automatically picks
Program
the audio program, the chosen program will be shown in ( ).
The value in
Routing
2 ON BOTH
The status of the port's individual audio component outputs. Can be
Left/Right
or
audio.outputs.alarm_muted
www.wegener.com

Figure A.6: Sample Unity 500 MPEG Status Report

Transport stream at 10.000 Mbps
00001, 00002
NTSC
ALARM MUTED, COMMAND MUTED
A01, ENG, SPA, FRE, . . . . . ., ITA, SP2,
E3
Program ATTEN
A01(PRI)
ALARM/CMD MUTE
. If MPEG stream is
active_settings
, , or
Not Authorized Not Present
if both
video.alarm_state
audio.port.route
(meaning
Right
depending on states of
ALARM&CMD
Routing Left
10 dB STEREO
ALARM MUTE
Description
present, shows
NOT
.
and
video.cmd_state
. Can be ,
STEREO 1 ON BOTH
to both), or .
REVERSE
audio.output.cmd_muted
.
41
U 500 U ' M
NITY SER S ANUAL
Right
in Mbps, obtained
data_rate
.
Not Available
are ,
unmuted
(meaning to both),
Left
, ,
– CMD ALARM
and
800001-01 Rev. E
,