Table of Contents
Advertisement
Table A.1: Unity 500 Network-Enabled Local Control Commands
SETTIMEOUT source time
source:
time:
Timeout.source
SNR alarm_level margin_offset
alarm_level:
margin_offset:
Sets
SNR Alarm Level
TEMP settings time
settings:
time:
Does
temporary insert
its
settings to
Temp
TEMPCH location time
location:
time:
Unit sets its
Temp
command.
TEMP
UNMUTE [source][source]
source:
Identical to
MUTE
www.wegener.com
1 – Fade
2 - Installation
3 - Carrier Search
4 - No COMPEL
5 – (No COMPEL) Header Seek
6 – (No COMPEL) Header Search
value in
Time-out
HH:MM:SS
is
for
and
00:00:30
Fade
4660:20:15
is set to
. See Section
time
Units in
with range from
dB
Units in
with range from
dB
and
.
alarm_level
The sum of
NOTE:
alarm_level
and
Margin Offset
See
Section 4.1, Perms/Temps/Searching & Settings
Length of insert in
HH:MM:SS
as described in
Table 4.2. UNITY 500 Settings Groups
settings.
Values from
to 48, indicating location in the settings table.
1
Same as for
command.
TEMP
settings to those retrieved from the settings table according to
Same as the
command.
MUTE
command, except that specified services are
format.
Minimum value
for
.
all others
4.3
(Page 24) for an explanation of timeouts.
to
, with one decimal place.
2.0
7.0
(with one decimal place) to difference between
1.0
and
margin_level
accordingly.
format. Valid range is
unmuted
33
U
500 U
'
NITY
SER
S
(Continued)
is
and
00:00:00
maximum value
cannot exceed
.
12.0
.
to
.
00:00:00
18:00:00
on page 27. Unit sets
. See the
location
.
800001-01 Rev. E
M
ANUAL
12.0
- Quick Links:
- Unity 500 Product Overview
Hide quick links:
Advertisement
Table of Contents
