Nikon DS-2MBW Instruction Manual page 156

.MICROSCOPE.
Condenser <Changes condenser module >
Compatible only with the Nikon 90i microscope.
1 ） In the condenser column
is registered. The condenser will change to the one you select.
2 ） After switching condensers, confirm that the selected number icon is marked with a red
border and that the condenser number and name are displayed.
NOTE:
*
*
Diascopic illumination aperture diaphragm
<Adjusts the diascopic illumination aperture diaphragm>
Compatible only with the Nikon 90i microscope.
1 ） In the diascopic illumination aperture diaphragm column
the diaphragm in increments of 0.1. Or select the
decrements of 0.1.
2） Briefly depress the mouse button to adjust the diaphragm in three-increment steps.
NOTE: The level indicator shows the current aperture of the diaphragm in
Diascopic illumination field diaphragm
<Adjusts the diascopic illumination field diaphragm>
Compatible only with the Nikon 90i microscope.
1 ） In the diascopic illumination field diaphragm column
diaphragm in increments of 0.1. Or select the
decrements of 0.1.
2 ） Briefly depress the mouse button to adjust the diaphragm in three-increment steps.
VI Basic Operations
6 Using the Microscope Control
, select a condenser number to which your desired condenser
Before using this function, you must set up the condenser information from
a PC with the setup software. For more information, refer to the instruction
manual for your microscope.
Right-click on an icon representing a condenser number, and the names of
all registered condensers will be displayed. You also can select the desired
condenser from within this display to change condensers.
increments of 1.4 in the range 2.0 to 30.5.
, select the
icon to close the diaphragm in
, select the
icon to close the diaphragm in
- 146 -
icon to open
icon to open the