Basic Operations; Select Preset Audio; Adjust Audio Parameters; Adjust Fad Bal - Planet Audio PNV9680 User Manual

Select Preset Audio

1. Enter the Audio setup mode
Touch the [ ] icon in the user interface and the Audio setup
interface will display on the screen.
2. Select Audio mode
Touch the desired Audio selection: [ Optional ] / [ Classic ] / [ Rock
] / [ Jazz ] / [ E.D.M ] / [ Pop ], and the Audio mode will change.

Adjust Audio Parameters

To adjust Audio parameters, touch and drag the parameters
adjustment bar.
[ User ]: Set the desired audio effect.
[ Flat ]: Select the original audio effect.
[ Reset ]: Cancel the audio function settings.
[ Loud: On/Off ]: When listening to music at low volumes, this
featurewill selectively boost certain bass and treble
frequencies.

Adjust FAD BAL

You can adjust front/back/left/right balance of the speaker and the
subwoofer volume to get balanced listening effect according to the
surroundings and your interest.
1. Enter the Audio setup mode
Touch the [ ] icon in the user interface and the Audio setup
interface will display on the screen.
2. Adjust subwoofer volume
Touch [ ] / [ ] or drag [
-12 to +12.
3. Adjust fader / balance value
Touch [ ] / [ ] / [
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
Notes:
1. The parameters of the Audio modes has been preset and you can
not change them besides 'User'.
2. The Audio mode will change to 'User' automatically when you
adjust the frequency value under the modes besides 'User'.
3. The value of Sub is independent of Audio mode and can be
adjusted separately.

Basic Operations

] to adjust subwoofer volume from
] / [ ] to adjust fader / balance value.
8