RAM 1500 Owner's Manual page 565

Center (EVIC) or Driver Information Display (DID)" in
"Understanding Your Instrument Panel" for further in-
formation.
NOTE: This mode is intended to be enabled with engine
running.
Transport Mode
To assist with flat bed towing, the air suspension system
has a feature which will put the vehicle into Entry/Exit
height and disable the automatic load leveling system.
Refer to "Electronic Vehicle Information Center (EVIC) or
Driver Information Display (DID)" in "Understanding
Your Instrument Panel" for further information.
NOTE: This mode is intended to be enabled with engine
running and all doors closed.
Wheel Alignment Mode
Before performing a wheel alignment this mode must be
enabled. Refer to "Electronic Vehicle Information Center
(EVIC) or Driver Information Display (DID)" in "Under-
standing Your Instrument Panel" for further information.
NOTE: This mode is intended to be enabled with engine
running and all doors closed.
Protection Mode
In order to "protect" the air suspension system, the
vehicle will enter Protection Mode when load leveling
cannot be achieved. Some driving may be required to
clear the protection mode telltale in the EVIC/DID. Refer
to "Electronic Vehicle Information Center (EVIC) or
Driver Information Display (DID)" in "Understanding
Your Instrument Panel" for further information.
NOTE: If equipped with a touch screen radio all
enabling/disabling of air suspension features must be
done through the radio. Refer to "Uconnect Settings" in
"Understanding Your Instrument Panel" for further in-
formation.
STARTING AND OPERATING 563
5