RAM 1500 Owner's Manual page 385

• Set Date
When in this display, you may set the date manually.
Press the "Set Date" button then press the corresponding
arrows above and below the current date to adjust.
Safety/Assistance
After pressing the "Safety/Assistance" button on the
touchscreen the following settings will be available:
• ParkSense — If Equipped
The ParkSense system will scan for objects behind the
vehicle when the transmission shift lever/gear selector is
in REVERSE and the vehicle speed is less than 11 mph
(18 km/h). It will provide an alert (audible and/or
visual) to indicate the proximity to other objects. The
system can be enabled with Sound Only, or Sound and
Display. To change the ParkSense status, press and re-
lease the "Sound Only" or "Sounds and Display" button.
UNDERSTANDING YOUR INSTRUMENT PANEL 383
Refer to "ParkSense" in "Understanding The Features Of
Your Vehicle" for system function and operating infor-
mation.
• Front ParkSense Chime Volume
The Front ParkSense Chime Volume settings can be
selected from the EVIC/DID or Uconnect System — if
equipped. The chime volume settings include LOW,
MEDIUM, and HIGH. The factory default volume setting
is MEDIUM. To change the mode status, press the "Front
ParkSense Volume" button and select the "Low" "Med"
or "High" buttons on the touchscreen. ParkSense will
retain its last known configuration state through ignition
cycles.
• Rear ParkSense Chime Volume — If Equipped
The Rear ParkSense Chime Volume settings can be se-
lected from the EVIC/DID or Uconnect System — if
equipped. The chime volume settings include LOW,
MEDIUM, and HIGH. The factory default volume setting
4