RAM 1500 Owner's Manual page 279

CAUTION!
Make sure the tonneau cover clamp and clamp wire
is in the proper released position. If the clamp and
clamp wire is not properly released, damage to the
tonneau cover material will result.
4. Pick up on the tonneau cover and fold it back onto the
second panel.
5. Pick up on the cover and fold it back onto the third
panel.
6. Once in the third panel position pull down on the
second set of clamps on both driver and passenger
sides to the semi clamped position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277
Semi Clamped Position
7. Pull down on the clamp wire and push the clamp up
into the proper released position.
3